Reso Nation

Comment

Comment by jeff weins on December 27, 2012 at 5:23pm

Tom I have had good luck mounting single coil pickups under the resonator, in my case a coffee can, it might be something to try in future builds.

This is my 3rd one( for sale page top of the page,)http://home.comcast.net/~204mike/diddleybow.html

Comment by Tom Walters on December 27, 2012 at 12:07am

Some more pics of my Catbro build.

 

 

 

 

 

 

Tom

Comment by Randy S. Bretz on December 25, 2012 at 4:24pm

Instead of putting the piezo disc in the biscuit, i stuck a cut 41mm disc on the rim edge of the cone with a purpleheart cover.  Picks up the sound great, but i still perfer a rod piezo bridge.

Comment by jeff weins on December 25, 2012 at 3:14pm

Brian, just watched the videos, i like your method for drawing the circle.

Tom, i hope you will post a video when the project is done

Comment by Tom Walters on December 24, 2012 at 6:32pm

Jeff,

The tool is one used to cut heavy construction paper.  You can get one in a craft store.  It made a nice circle and cut the cedar ok but the depth wasn't enough to go all the way through so I drilled a hole and finished up with a coping saw.

 

Tom

Comment by bairfoot cajun on December 24, 2012 at 4:21pm

howdy jeff,just stopped by to tell ya i cut the hole for a cone with a coping saw,as far as marking it goes i use an old school system that is difficult to explain but you can see the explination if you go to a video i am making that shows the steps of one way i use to build resonator guitars.i just added a blog on the main page called--vintage ammo box resonator build---several helpful ideas in there and the part about marking the soundhole is in the second video.hope this helps you.

Comment by jeff weins on December 24, 2012 at 3:28pm

Please tell me about the tool you are using to mark? cut? the hole.

thanks jeff

Comment by Tom Walters on December 24, 2012 at 12:22am

Just working on a reso guitar made with a cedar box that was sold with Salmon.  I am using a cat food dish so my official name for it is the "CATBRO"

 

Here are the parts:

 

Cutting the hold for the catfood dish:

 

 

 

Braced the box and attached the neck and glued in the cat bowl (2 pics):

 

 

 

 

Will post more as I get closer to completion.

 

Merry Christmas all.

 

Tom

Comment by jeff weins on February 19, 2012 at 6:25pm

Just finished a coffee can resonator

http://home.comcast.net/~204mike/diddleybow.html

photos and video at the bottom of the page

Comment by Randy S. Bretz on September 18, 2011 at 1:35pm

http://handmademusic.ning.com/photo/scotts-biscut-bridge?context=user  the 41 mm piezo elements [ 1 1/2" round] work real nice for reso biscuits.

• ‹ Previous
• 1
• 2
• 3
• 4
• …
• 10
• Next ›
• Page