Cigar Box Guitar Headquarters - CBG HQ
Tips and Tricks for getting the most out of your shop and building better instruments
Latest Activity: Nov 20, 2017
Started by Ted Crocker. Last reply by Sonny Armintrout Jan 16, 2014.
Here ya go, let me know if I missed anything. Have questions? Just ask!
CB Gitty Crafter Supplies: Fretting…Continue
Tags: Supplies, &, Tricks, Tips, Fretting
Started by proudy1959. Last reply by Ellwood T Bear May 4, 2013.
A few tips here that will save a little bit of moneyCleaning your paint brushes - all important if you have spent a lot of dosh on a good quality brush. After use clean as usual with white spirit to…Continue
Started by Randy S. Bretz Sep 11, 2012.
Started by Brian Parks. Last reply by Hal Somervill May 11, 2012.
Here's a quick demo for waterslide decals which are a great way to get a logo or something on your build.…Continue
one way to make your own spool clamps.spool%20clamps.JPG
I saw a vid about a jig to hold the neck while gluing a scarf joint, now I cant find any more, can someone show me where it is?
The picture is one of my best little ideas for nut cutting.
This is a jumbo fret with the spine cut off.
When you have a nut glued in place with the initial slot cuts for strings, lay this on top of the fretboard against the nut and you have a depth gauge for finishing the string slots. For anything from fretless to medium frets, this serves as a depth gauge. You can get the right depth on the first cut. Saves a ton of time.
Fret hammering arbor made from corian.
To Sgnt Roy,
You can find inexpensive (cheap) tuners, that work pretty well, on eBay for about $1 each including shipping, when you buy 6. I've bought a lot of them and only had one failure, and that was when my nut angle and scarf joint was very steep, thus overworking the tuner.
I just copied this post to here from Ted's Mad Scientist Lab
Check out Fretting Tips, Tricks & Supplies.
Lots of great info!
was wondering of some crafty ways to make some bandsaw jigs- I found these - http://users.stratuswave.net/~wd8jik/bjig/bandsaw.htm
what is great it's my bandsaw - so I now it'll work
Welcome toHandmade Music Clubhouse
Sign Upor Sign In
© 2018 Created by Ted Crocker.
Report an Issue |
Terms of Service
Please check your browser settings or contact your system administrator.