Handmade Music Clubhouse

Cigar Box Guitar Headquarters - CBG HQ

martin baker
  • antwerp
  • Belgium
Share

Martin baker's Friends

  • Tug Wilsson
  • Pete "Papa Bo" Turner
  • mark andrew hiley
  • David L.
  • Ted Crocker

martin baker's Discussions

acoustic verses electric strings

Started this discussion. Last reply by martin baker Mar 27, 2014. 2 Replies

Hi out there , holidays are coming up & I wanna take my box with me , & I was wondering ,is there a big difference between metal acoustic strings & electric strings?Continue

2 stringer

Started this discussion. Last reply by Wichita Sam Feb 6, 2014. 1 Reply

It' s that new boy again! after some string changes I'm still not pleased with the sound I'm getting. What I'm looking for is to get a delta blue sound from 2 strings, any ideas?Continue

 

martin baker's Page

Latest Activity

martin baker posted photos
Jul 25
martin baker commented on martin baker's photo
Thumbnail

P1030777

"The neck is from a  discarded afzelia window, the CB was a rather plain box so I stained it red, the sound hole unit is a drip tray  from a espresso coffee machine, bought bridge with adapted saddle, tailpiece same. bridge PUP is double…"
Jul 25
Ted Crocker commented on martin baker's photo
Thumbnail

P1030777

"Yeah, there's a glitch in the Clubhouse software, some pics are weird.  Click View Full Size.  Sorry, but It ain't my job or goof... ANYWAY, Martin. tell us more, there's a lot to like about this build"
Jul 25
Jim N. commented on martin baker's photo
Thumbnail

P1030777

"Very nice. (Click on "View Full Size," folks.)"
Jul 24
martin baker commented on martin baker's photo
Thumbnail

P1030722

"Thanks Ted, but I pinched the idea from "youtube"."
May 8
Ted Crocker commented on martin baker's photo
Thumbnail

P1030722

"Very cool Martin!  Great invention."
May 6
martin baker commented on martin baker's photo
Thumbnail

P1030722

"I made this thicknessing jig mainly for preparing fretboards, but it will see other jobs too."
May 4
martin baker posted photos
May 4
Phil Hale commented on martin baker's photo
Thumbnail

P1030500

"Your very welcome, at 67 I know quality when I see it."
Jun 6, 2016
martin baker commented on martin baker's photo
Thumbnail

P1030500

"Many thanks Phil."
Jun 6, 2016
Phil Hale commented on martin baker's photo
Thumbnail

P1030500

"Superb work, I take my hat off to you."
Jun 6, 2016
Ted Crocker commented on martin baker's photo
Thumbnail

rack

"Great idea Martin"
May 31, 2016
martin baker posted photos
May 30, 2016
martin baker replied to Kathy Creek's discussion Small instruments are here! in the group - Hello - My Name Is...
"High end work!"
May 29, 2016
martin baker replied to Bill Baker's discussion Hello, My name is Bill in the group - Hello - My Name Is...
"Hi Bill & welcome. Got any more pics , cos the one you sent looks real nice, = quality! Keep em comin!"
Mar 10, 2016
martin baker replied to Rose Ericson's discussion Well helloooooo there........ in the group - Hello - My Name Is...
"Welcome Rose, whats a soap cutter? So much info within these walls, you will alway get an answer to any question! happy building."
Jan 12, 2016

Profile Information

Welcome to the Clubhouse! How did you hear about us?
web links
What instruments are you building or playing?
double diddleys. 3 strings, self made box & biscuit tin.

Hi this is my first build attempt, proto type with baby amp & finished stage.

martin baker's Photos

Loading…
  • Add Photos
  • View All

martin baker's Videos

  • Add Videos
  • View All

Comment Wall (16 comments)

You need to be a member of Handmade Music Clubhouse to add comments!

Join Handmade Music Clubhouse

At 11:32am on August 17, 2017, Ted Crocker said…

At 12:04pm on August 17, 2016, Ted Crocker said…

At 8:15pm on August 17, 2015, Ted Crocker said…

At 1:59am on August 17, 2014, Ted Crocker said…

At 3:54pm on April 11, 2014, Tug Wilsson said…

Thank Sir. I have much to learn and am sure I will enjoy this new world!!!

At 4:14pm on December 27, 2013, David L. said…

Hi,

I have replied to your email.

The prewired kit you have bought will work as it is (plug an amp lead into the jack socket and hold the pickup over the strings whilst you strum and you should hear it through the amp - if you don't then check the volume is turned up).  It is a ready to go circuit, but often it will give some hum and if this is the case the next step is to ground the strings with one extra wire from the back of the volume pot to somewhere in connection with the strings (so the bridge if it is metal or if not the tailpiece is used and if the tailpiece is also wood put a metal strip that the strings pass through before passing into the tailpiece and solder the wire to this strip).

At 4:39pm on December 26, 2013, David L. said…
Hi Martin,
Thank you for the photo - depending on the string spacing I suspect you will get either no sound from the outer strings or a noticeable volume difference.
When others have used this pre-wired pickup they either position it across so 3 out of the 6 poles of the pickup have a string near them, or slant it at an angle so the strings cross one or more of the pickup poles. As it is a single coil pickup (as opposed to a humbucker) you often find they transmit electrical noise from nearby lights,computers etc unless you also ground the strings by adding another wire from the bridge or tail piece ( add a metal strip through the tailpiece that the strings pass through unless you are using a metal bridge or metal tailpiece in which case solder the wire to part of that) the other end of the string grounding wire is normally soldered to the back of the volume pot which is used to provide a central point to ground all the bits that need it before a single ground goes from this pot to the output jack ( it is supposed to stop ground loops). If you find it hard to visualize what I mean by slanting the pickup just say and I will find some photos to demonstrate this tomorrow.
I'll go into more details about the piezo then.
At 5:32am on December 26, 2013, David L. said…
Are you able to take a photo of the wired pickup or post the link off the www then I will have a better idea of the wiring? I am off to visit relatives until later so will reply properly then.
Regards,
David
At 6:49pm on December 25, 2013, David L. said…

Hi Martin,

Merry Christmas.

Yes you can but you are then limited to one sound.

You can easily use a simple 3 way switch circuit to give you three sounds (mag/both/piezo) or a simple blend pot.

For any circuit the pickups need a live and a ground (unless you include pickups in series).

Also if you have a magnetic pup you need to add a ground to the bridge or tailpiece to ground the strings.

Regards,

David

At 6:37pm on December 20, 2013, David L. said…

Hi Martin,

Regarding piezos - there is a difference in that for rods there are 2 main types. A rigid one with 6 bumps http://www.suntekstore.co.uk/product-15006122-bendable_piezo_cable_pickup_for_acoustic_guitar.html(1 for each string) and sometimes if you get the string spacing so it falls between a bump you have slightly less volume from that string even though there is a bridge saddle between the string and rod.  Others have commented on it on CBN and I have had it happen once so you probably will be fine and if you have this problem you can always change to the other type very easily. The other is a flexible cable rod that doesn't have this problem http://www.suntekstore.co.uk/product-15005697-bendable_piezo_cable_undersaddle_pickup_for_acoustic_guitar.html.

Alternatively piezo discs are cheap and cheerful (and can be built into the bridge or placed under the lid).

For a great choice of sound my personal favorite is to use a minihumbucker (4 wired plus shield wire) http://www.suntekstore.co.uk/product-15006824-humbucker_pickup_for_stratocaster_gibson_electric_guitar.html and use the seymour duncan esquire wiring http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=esquire_hb (you need a 3 way switch called an Oak Grigsby as per diagram - the cheap square box type of 3 way switch has an extra connection that stops it working fully) to get 3 tones and also blend it with a piezo  so you get the acoustic sound mixed with the magnetic.  The parts linked are ones I have bought from suntekstore to show you what I mean, but they are a bit cheaper on ebay at the moment and are all the same in terms of quality.

Regards,

David 

 
 
 

© 2017   Created by Ted Crocker.   Powered by

Badges  |  Report an Issue  |  Terms of Service